Brush cutter attachments

image115

X-Treme Skid Steer Brush Cutter

14-20 GPM and 20-30 GPM options

  • 6’’ cutting capacity.
  • 3/16’’ deck with sides reinforced with 3/8’’ AR400.
  • High torque Parker motor. 
  • 3 bidirectional blades made with 5/8” AR400.
  • Does not require a case drain.
  • Available in 60”, 72” or 78″ cutting width.
  • 3/8″ Double clover leaf shaped blade holder.
  • 100 HP right angle gear box with 6 bolt flange.
  • 1/4″ deck optional upgrade.
  • Optional mulching teeth.


image116

X-treme Skid Steer Piston Motor Brush Cutter

X-treme Piston Motor Brush Cutter 27-35 GPM & 30 GPM- 48 GPM

  • 7’’ cutting capacity.
  • 1/4’’ deck with sides reinforced with 3/8’’ AR400.
  • Piston Motor direct Drive.
  • 3 bidirectional blades made with 5/8” AR400.
  • Requires a case drain.
  • Available in 60”, 72”,  78″ or 84″ cutting width.
  • 1/2″ Double clover leaf shaped blade holder.
  • Optional mulching teeth.

X-treme Piston Motor Brush Cutter 17 GPM- 27 GPM

  • 7’’ cutting capacity.
  • 3/16’’ deck with sides reinforced.
  • 3 bidirectional blades made with 5/8” AR400.
  • Requires a case drain.
  • Piston motor direct drive.
  • Available in 60”, 72”, 78″ or 84″ cutting width.
  • 3/8″ Double clover leaf shaped blade holder.
  • 3/4″ hoses.
  • Optional mulching teeth.

image117

Heavy Duty Skid Steer Brush Cutter

Open Front Heavy Duty Brush Cutter

  • 4’’ Cutting Capacity.
  • 3/16’’ Deck with 3/8″ A36 reinforced sides.
  • RC100 gear box.
  • Parker motor.
  • 2 blades with 5/8″ AR400.
  • Does not require a case drain.

brush cutter attachments

image118

Swing Boom Cutter

  • Reach advantage over our typical brush cutter.
  • Can be used as a side cutter.
  • high torque motor with built in relief valve.
  • Maxmium supply pressure of 4,000 PSI.
  • 3″ x 16″ tilt cylinders.
  • 5/8″ AR400 Blades.
  • 44″ cut.
  • 3″ cutting capacity.
  • Does not requires case drain.
  • Optional universal, 8 pin or 14 pin wiring harness are available.

image119

Piston Motor Swing Boom Cutter

  • Reach advantage over our typical cutter.
  • Can be used as a side cutter.
  • Direct drive piston motor with Max 4000 PSI.
  • 3″ x 16″ tilt cylinders.
  • 5/8″ AR400 Blades.
  • 44″ cut.
  • 4″ cutting capacity.
  • Requires case drain.
  • Optional universal, 8 pin or 14 pin wiring harness are available.